Which aluminium alloys do you use for cans, ends and coil?

Can bodies are drawn from 3104-H19 aluminium, easy-open ends from 5182-H48 shell stock and tabs from 5052, while lacquered coil for lids is supplied in 8011 and 3104 tempers. Every coil arrives with a mill certificate stating alloy, temper, thickness tolerance and surface class.

What is the minimum order quantity for aluminium cans and easy-open ends?

Standard bright or plain cans start at one 20 ft container; fully printed cans normally start at 100,000 pieces per design because of plate and lacquer set-up. Easy-open ends in 200#, 202#, 206#, 209#, 211#, 300#, 307#, 401# and 502# are stocked, so trial orders from 200,000 pieces can ship within 15 working days.

Are your lids and cans food-contact compliant for export markets?

Internal lacquers are BPA-NI and are tested against FDA 21 CFR 175.300, EU Regulation 1935/2004 and GB 4806.10 for food-contact migration. We supply migration test reports, food-grade declarations and RoHS/REACH statements with each shipment.

How do you protect aluminium packaging during ocean freight?

Cans travel on bulk pallets with top frames, kraft slip sheets and stretch hood film; ends are packed in polyethylene sleeves inside fibre drums or cartons with desiccant. Loading photos and container seal numbers are sent before vessel departure so quality can be verified on arrival.

Can you match a filling line with specific can and end dimensions?

Yes. Share your seamer model, line speed and target fill volume and our engineers will confirm can height, body wall gauge, neck diameter, end curl and countersink depth, then supply drawings and a sample lot for seam teardown analysis before mass production.

Central European Supply Chain & Engineering Integration

High-Quality Aluminium Lids Supplier & Suppliers for Czech Republic

Delivering food-grade easy-open ends, precision-slit coil stock, and anti-static industrial lids tailored to the Czech Republic’s thriving food, craft beverage, and advanced manufacturing sectors.

Send Inquiry Now

Featured Packaging Solutions

High-Performance Metal Packaging Solutions for Czech Bottlers & Processors

Engineered for seamless integration with high-speed Ferrum, Krones, and Angelus seaming lines operational across Bohemia and Moravia.

Regional Market Analysis

The Strategic Importance of Aluminium Lids in the Czech Industrial Sector

Analyzing the shift toward sustainable metal closures across Prague, Plzeň, South Moravia, and the Central Bohemian region.

Craft Brewery & Beverage Surge

The Czech Republic leads the world in per capita beer consumption. With iconic brewing hubs in Plzeň and Budweis alongside hundreds of emerging microbreweries, the demand for 202 SOT (Stay-On Tab) and RPT (Ring Pull Tab) aluminium lids has grown exponentially. Processors are shifting away from traditional glass bottles toward infinitely recyclable aluminium cans to lower transport carbon emissions across Central Europe.

Pharmaceutical & Nutrition Packaging

With major healthcare, infant formula, and nutritional supplement facilities surrounding Prague and Olomouc, airtight closure systems are vital. High-grade 307#, 401#, and 502# aluminium easy-open ends featuring nitrogen-flush compatibility ensure extended shelf stability, zero moisture ingress, and strict compliance with European health safety standards.

High-Tech Powder & Electronics

The industrial technology triangle around Brno requires specialised packaging for sensitive chemical reagents and electronic-grade metal powders. Anti-static 300# aluminium lids eliminate static cling during filling and decanting operations, protecting high-value chemical compounds from atmospheric degradation.

100%

Infinitely Recyclable

0.21mm

Ultra-Gauge Precision

6.2 Bar

Max Pressure Tolerance

BPA-NI

EU Compliant Linings

Regulatory & Compliance Assurance

EU Green Deal & PPWR Compliance for Czech Importers

Navigating European packaging mandates with certified BPA-Non-Intent coatings and traceable aluminium alloys.

EU Regulation 1935/2004 & FDA 21 CFR

Every batch of aluminium lids supplied to the Czech Republic undergoes rigorous overall and specific migration testing. We issue comprehensive declarations of compliance (DoC) proving zero hazardous chemical leaching under severe thermal retort and acidic storage conditions.

BPA-NI (Non-Intent) & Organosol Coatings

To meet the stringent environmental health directives enforced by the Czech Agriculture and Food Inspection Authority (SZPI), our internal lacquer formulations use advanced acrylic or polyester BPA-NI lacquers, safeguarding taste profile and consumer health.

PPWR Circular Economy Directives

Under the EU Packaging and Packaging Waste Regulation (PPWR), Czech enterprise buyers face rising taxation on unrecyclable multi-layer plastics. Aluminium ends crafted from high-purity 5182-H48 and 3104 alloys seamlessly integrate into Europe’s closed-loop scrap recycling ecosystem.

Technical Precision

Alloy Engineering & Mechanical Specifications

Tailored chemical compositions engineered to withstand double-seamer mechanical stresses and internal pressure surges.

Alloy & Temper	Primary Component	Thickness Range	Tensile Strength (MPa)	Recommended Czech Industry Application
5182-H48 Shell Stock	Al-Mg-Mn (Mg 4.0-5.0%)	0.21mm – 0.25mm	360 – 410	High-pressure beverage lids (202 SOT / RPT), craft beers, carbonated sodas.
5052-H19 Tab Stock	Al-Mg (Mg 2.2-2.8%)	0.30mm – 0.40mm	290 – 340	Ergonomic pull tabs, custom colour anodized stay-on closures.
8011-O / H14 Foil Stock	Al-Fe-Si	0.18mm – 0.28mm	140 – 180	Peelable membrane lids, infant formula cans, pharmaceutical powder sealings.
3104-H19 Can Stock	Al-Mn-Mg (Mn 0.8-1.4%)	0.24mm – 0.28mm	270 – 310	DWI draw-and-ironed body stock, food preservation cans.

Request Technical Datasheets & Drawings

Quality Assurance Roadmap

End-to-End Double-Seam Engineering Protocol

Ensuring zero leak rates and optimum countersink depth across high-speed packaging lines.

Stage 01

Spectral Alloy Verification

Incoming aluminium coils are inspected via optical emission spectrometry to verify magnesium and manganese tolerances before stamping.

Stage 02

Precision Shell Stamping

High-speed Minister and Stolle press lines stamp end shells with micro-level curl uniformity, ensuring consistent feeding into seamer turrets.

Stage 03

Enamel Rater & Micro-Leak Test

100% online high-voltage enamel rating checks internal lacquer continuity; high-pressure bubble tests ensure rivet integrity.

Stage 04

Seam Teardown Calibration

We supply custom chuck and roll recommendations for local Czech plants to guarantee overlap percentages >45% and zero micro-leakage.

Streamlined Logistics

Reliable Supply Chain from Factory to Czech Warehouses

Optimized multimodal shipping routes connecting global manufacturing excellence with Central European transport corridors.

Port to Inland Terminal Routes

Container shipments are routed efficiently via major European entry ports such as Hamburg, Bremerhaven, or Koper, connecting directly via rail freight to inland customs hubs in Prague, Česká Třebová, and Ostrava.

Export Packaging Protection

Aluminium lids are packed inside food-grade polyethylene sleeves, sealed in corrugated fiberboard drums or cartons with desiccants, and secured on fumigated ISPM-15 wooden pallets wrapped in heavy-duty stretch film.

Customs & Tax Efficiency

All documentation—including Commercial Invoices, Packing Lists, Bills of Lading, Certificate of Origin, and EUR.1 movement certificates—is formatted for rapid clearance through Czech Customs authorities.

Knowledge Base & FAQ

Frequently Asked Questions by Czech Procurement Teams

Expert answers regarding minimum order quantities, filling line compatibility, and technical customizations.

What is the typical lead time for delivery of aluminium lids to the Czech Republic?

Standard stocked items like 202 SOT ends or 307# easy-open lids ship within 10 to 15 working days. Ocean freight via Hamburg/Bremerhaven followed by rail transit to Czech warehouses typically takes 25 to 35 days. Express air shipment for urgent engineering samples takes 5 to 7 days.

Can you provide custom logo printing and laser-etched tab designs for Czech craft brands?

Yes! We provide multi-colour lithographic printing on the top shell as well as custom laser-etched promotional codes, QR codes, or brand logos directly on the pull tab. Anodized tabs in black, red, green, blue, and gold are also available.

Are your aluminium lids compatible with existing Ferrum or Krones high-speed seamers?

Absolutely. Our ends are manufactured to exact industry-standard countersink, curl, and lip tolerances. We supply complete seam tooling calibration profiles, chuck/roll dimensions, and double-seam inspection criteria matching European seamer specifications.

What minimum order quantities (MOQs) apply to trial orders?

For standard unprinted ends or coil stock, MOQs start from 200,000 pieces (or 1 full pallet lot for industrial evaluation). For custom-printed lids or custom anodized tabs, MOQs generally start at 500,000 pieces per batch.

Comprehensive Product Catalog

Explore Our Complete Range of Lids & Cans for Czech Republic

Browse high-durability tinplate ends, beverage cans, and specialized freeze-resistant lids engineered for demanding storage environments.

Ready to Elevate Your Packaging Performance in Czech Republic?

Contact our packaging engineering team today for technical consultations, seaming teardown support, and factory-direct pricing quotes.

Send Inquiry Now